Slurry Tanker T507/1 – 2500 Liters

Standard Equipment

1. Tank

   • Hot-dip galvanized tank, galvanized on both sides

   • Tank passivation protects fresh zinc coating from the aggressive effects of slurry

   • Rear manhole: ø500 mm (on T507/2), ø700 mm (on T507/1, T507/2, T507/6) – manhole cover on a hinge

   • Tubular filling level indicator with sight glass

   • Drain outlet with 1½” valve at the lowest point of the tank

   • 4” sight glass on the rear end plate

   Chassis design: self-supporting

   • SELF-SUPPORTING – drawbar mounted on reinforced supports under the tank, hot-dip galvanized

   • Interchangeable hitch – bolted ø50 mm

   • Mechanically adjustable support leg

   Wheel assembly

   • Single axle, two wheels

   • Tires according to the specification table

   • Mudguards

   Brake system

   • Dual-line pneumatic brakes with 4-step braking force adjustment

   • Manual parking brake

   Compressor

   • Type according to the specification table

   • Drive speed: 540 rpm or 1000 rpm (on request)

   Piping & safety

   • Reinforced hoses resistant to temperature connecting the fittings

   • Overfill protection with dual-ball valve and sight glass on the top of the tank, plus a siphon with sight glass

   • Pressure-vacuum gauge (manovacuumeter)

   • Two safety valves: overpressure up to 0.05 MPa and vacuum up to -0.05 MPa

   • Oil separator – wet air filter, silencer reducing compressor noise

   Suction and discharge connections

   • Suction couplings: 4” (ø110 mm), or 6” (ø150 mm) on T507/6

   • Main discharge outlet in rear manhole cover: 4” with hydraulic gate valve

   • Front left and right side – blanked off, prepared for manual gate valve installation

   • Rear coupling – blanked off, prepared for manual gate valve installation

   Electrical installation

   • 12V system and lighting

   Hoses & accessories

   • 4” (ø110 mm) hose

   • Transport brackets for suction hose

   • Hose with strainer basket to prevent suction of large debris

   • Suction hose length: 6 m

   Spreading device

   • Profiled spreading spoon, POMOT design 94, spreading width up to 14 m

   Homologation certificate

   • Allows registration and operation on public roads

   PTO shaft

   ---

   VERSION – SUSPENSION – TIRE DIMENSIONS – TIRES – COMPRESSOR TYPE

   CONSTRUCTION	VERSION	SUSPENSION	TIRE DIMENSIONS	TIRES	COMPRESSOR TYPE
   SELF-SUPPORTING	ECONOMIC	Single axle	745×255	10.0/75-15.3	MEC or KD 3000
   	STANDARD	Single axle	855×290	11.5/80-15.3	MEC or KD 3000
   	CLASSIC	Single axle	855×290	11.5/80-15.3	MEC or KD 4000
   	PREMIUM	Single axle	890×400	400/60-15.5	MEC or KD 4000