Slurry Tanker T544/3 – 8000 Liters

Single-axle suspension

The T 544/3 series is characterized by fast filling time and a strong, compact construction. Trailers from this series are also available in two variants: self-supporting construction with a drawbar, and frame construction. The trailers can be additionally equipped with a surface injector unit using trailing hoses with a working width of 9 m (the unit requires the trailer to be prepared for applicators).

📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

Category: Tag:

Standard Equipment

  1. Tank

    • Double-sided hot-dip galvanized tank

    • Tank passivation protecting fresh galvanization against slurry corrosion

    • Rear hatch ø700 mm with hinged cover

    • Tubular filling level indicator with sight glass

    • Discharge nozzle with 1 ½” valve located at the lowest point of the tank

    • 4” sight glass on the rear bottom plate

    • Upper hatch ø350 mm

    Vehicle construction: self-supporting or frame

    • Self-supporting – drawbar mounted on reinforced supports under the tank, hot-dip galvanized

    • Frame – tank mounted on a closed-section frame

    • Interchangeable hitch – bolted ø50 mm

    • Mechanically adjustable support leg

    • Single axle or two-axle suspension with springs

    • Tires according to table

    • Mudguards

    • Two-line pneumatic brake system with 4-step brake force adjustment

    • Manual parking brake

    • Compressor type according to table

    • Power take-off 540 rpm or 1000 rpm (optional)

    • Reinforced temperature-resistant hoses connecting fittings

    • Overflow protection with a double-ball valve and sight glass on the tank top, plus siphon with sight glass

    • Pressure gauge

    • Two safety valves: overpressure up to 0.05 MPa and vacuum up to -0.05 MPa

    • Oil separator – wet air filter and muffler reducing compressor noise

    • Suction nozzles 6” ø150 mm

    • Main discharge nozzle in the rear hatch cover 6” with hydraulic slide valve 6”

    • Front left and right nozzles sealed, prepared for manual slide valve installation

    • Rear nozzle sealed, prepared for manual slide valve installation

    • 12V electrical and lighting installation

    • 6” hose (ø150 mm)

    • Hose transport holders

    • Suction hose with intake basket protecting against large debris

    • Suction hose length – 6 m

    • Spreading device: Profiled spreading shovel POMOT 94 pattern, spreading width up to 14 m

    • Certificate of homologation enabling registration and public road use

    Versions and Technical Data

    VERSION SUSPENSION TIRE DIMENSIONS TIRE SIZE COMPRESSOR TYPE FRAME CONSTRUCTION
    ECONOMIC single axle 1235 x 550 550/60-22.5 MEC or KD 6500 SELF-SUPPORTING
    STANDARD single axle 1235 x 550 550/60-22.5 MEC or KD 6500 SELF-SUPPORTING
    CLASSIC single axle 1235 x 550 550/60-22.5 MEC or KD 8000 SELF-SUPPORTING
    PREMIUM single axle 1580 x 587 23.1 x 26 HD MEC or KD 8000 SELF-SUPPORTING
    ECONOMIC single axle 1235 x 550 550/60-22.5 MEC or KD 6500 FRAME
    STANDARD single axle 1235 x 550 550/60-22.5 MEC or KD 6500 FRAME
    CLASSIC single axle 1235 x 550 550/60-22.5 MEC or KD 8000 FRAME
    PREMIUM single axle 1580 x 587 23.1 x 26 HD MEC or KD 8000 FRAME

Optional Equipment

Spreading Devices

  • Wide-angle spreader (working width up to 14 m)

  • Slurry thrower (working width from 6 to 15 m)

  • Mobile device for road spraying and crop watering, 2.5 m width

  • Mobile device for road spraying and crop watering, 4.5 m width

  • PERROT type spreading scoop (working width up to 12 m)

  • Double spreading scoop (working width up to 16 m)

  • Surface injector unit with trailing hoses, working width 3 m by POMOT – mechanically foldable

  • Surface injector unit with trailing hoses, working width 3 m by POMOT – hydraulically foldable

  • Plant watering device

Chassis System

  • Upper transport hitch (only for frame construction)

  • Drawbar suspended on longitudinal spring

  • Ball hitch K80

  • Rear steering axle (only for T 546 type)

  • Hydraulic support leg

  • Hydraulic brake (for one axle)

  • Wheel chocks, 2 pcs

Filling Systems

  • Additional manual slide valve 6″

  • Quick coupling for manual slide valve 6″

  • Suction hose extension 6″, length 3 m

  • Suction hose extension 6″, length 6 m

  • Additional suction hose 6″, length 6 m

  • Injector 4″ or 6″ – suction from 10 m depth

  • Hydraulic compressor drive

Accessories

  • Two galvanized metal hose boxes

  • Two galvanized metal boxes for carrying plant protection products

  • Calibration stickers for pipe level indicator

  • Fully openable rear bottom plate

  • Upper hatch Ø500 mm with ladder

  • Ladder

  • W52 pipe fitting with 2″ ball valve

  • Pneumatic agitator

  • Hydraulic screw agitator

  • Wide-angle PTO shaft

  • Plastic tool box

  • Hand wash dispenser

  • Additional painting of galvanized tank (one side)

  • Additional painting of galvanized frame

Note: Other additional equipment options are also available (see accessories section for slurry tankers).

Downloads

      

Videos

Gallery

Related products

  • Slurry Tanker

    Slurry Tanker T520 – 20 000 Liters

    The T 520 series has been developed based on the experience gained through close cooperation with our customers during the configuration process and by tailoring our offer to their individual needs. Its large capacity and comprehensive equipment make it perfect for intensive work on farms, in biogas plants, or for professional service companies.

    📱 Marcin Górski: +48 691 897 …

    suspension with two sprung axles (rear axle steering)
  • Slurry Tanker

    Slurry Tanker T550 – 18000 Liters

    The T 550 series is designed for demanding users who value reliability, economy, and versatility of use, thanks to the proper selection of additional equipment.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

    Suspension: two leaf-sprung axles (rear axle steerable) – wheelbase 1900 mm
  • Slurry Tanker

    Slurry Tanker T550 – 18500 Liters

    The T550 trailer has been designed for precise slurry distribution. Its robust frame construction ensures durability, while the lightweight, corrosion-resistant plastic tank guarantees long service life.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

    Plastic tank
  • Slurry Tanker

    Slurry Tanker T520 – 20 000 Liters

    The T 520 series features tankers with TRIDEM suspension. Advanced technology has been combined with simplicity of operation, designed and built by operators for operators. These large-capacity tankers, tested in the toughest conditions, are the perfect solution for large farms.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 …

    TRIDEM Suspension