Slurry Tanker T546/A – 10000 Liters

Standard Equipment

1. Tank

   • Hot-dip galvanized tank, inside and outside

   • Tank passivation to protect fresh galvanization from slurry action

   • Rear manhole Ø700 mm – manhole cover on a hinge

   • Tubular level indicator with sight glass

   • Drain nozzle with 1½″ valve at the lowest point of the tank

   • 4″ sight glass on the rear tank end

   • Top manhole Ø350 mm

   • 4″ safety valve

   Chassis design: self-supporting or frame construction

   • Self-supporting: drawbar mounted on reinforced supports under the tank, hot-dip galvanized

   • Frame: tank mounted on a frame made of closed steel profiles

   • Replaceable drawbar eye – bolted, Ø50 mm

   • Mechanically adjustable support leg

   • Single-axle, single-axle with leaf spring suspension, or tandem axle with leaf spring suspension

   • Tires according to the table

   • Fenders

   • Two-line pneumatic braking system with 4-stage braking force adjustment

   • Mechanical parking brake

   Compressor – type according to table

   • Drive: 540 rpm or, on request, 1000 rpm

   • Reinforced temperature-resistant hoses connecting fittings

   • Overflow protection with dual ball valve and sight glass on top of the tank, plus siphon with sight glass

   • Vacuum-pressure gauge

   • Two safety valves: overpressure valve up to 0.05 MPa and vacuum valve up to -0.05 MPa

   • Oil separator – wet air filter and silencer for compressor noise reduction

   Suction ports

   • 6″ suction ports Ø150 mm

   • Main discharge port in the rear manhole cover: 6″ with hydraulic 6″ gate valve

   • Front left and right: capped, prepared for installation of manual valves

   • Rear port: capped, prepared for installation of manual valve

   Electrical system

   • 12V electrical and lighting installation

   Suction hose system

   • 6″ (Ø150) suction hose

   • Transport brackets for suction hose

   • Suction hose with strainer basket to prevent large objects from entering

   • Suction hose length: 6 meters

   Spreading equipment

   • Shaped splash plate, POMOT 94 design, spreading width up to 14 m

   Type approval certificate

   • Enabling registration and legal operation on public roads

   PTO shaft included

   ---

   Specifications by version:

   VERSION	SUSPENSION	TIRE DIMENSIONS	TIRE SIZE	COMPRESSOR TYPE
   SELF-SUPPORTING DESIGN
   ECONOMIC	single-axle	1235×550	550/60×22.5	MEC or KD 8000
   STANDARD	single-axle	1340×600	600/55×26.5	MEC or KD 8000
   CLASIC	single-axle	1580×587	23.1×26 HD	MEC 9000 or KD 10000
   PREMIUM	single-axle	1590×714	28Lx26	MEC 9000 or KD 10000
   FRAME DESIGN
   ECONOMIC	single-axle	1235×550	550/60×22.5	MEC or KD 8000
   STANDARD	single-axle	1340×600	600/55×26.5	MEC or KD 8000
   CLASIC	single-axle	1580×587	23.1×26 HD	MEC 9000 or KD 10000
   PREMIUM	single-axle	1590×714	28Lx26	MEC 9000 or KD 10000
   FRAME DESIGN – SPRUNG SINGLE-AXLE
   ECONOMIC	single-axle sprung	1235×550	550/60×22.5	MEC or KD 8000
   STANDARD	single-axle sprung	1340×600	600/55×26.5	MEC or KD 8000
   CLASIC	single-axle sprung	1580×587	23.1×26 HD	MEC 9000 or KD 10000
   PREMIUM	single-axle sprung	1590×714	28Lx26	MEC 9000 or KD 10000