Slurry Tanker T546/2 -16000 Liters

Suspension: two leaf-sprung axles – wheelbase 1480 mm

The T 546/2 series consists of 16,000-liter trailers with a two-axle leaf-sprung suspension and a steerable rear axle. These trailers offer the greatest flexibility for additional equipment, including various units, filling systems, lighting, and control options. This series is designed for demanding professionals.

📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

Category: Tag:

Standard Equipment

  1. Tank

    • Tank hot-dip galvanized on both sides

    • Tank passivation protecting fresh galvanization from the effects of slurry

    • Rear hatch ø700mm – hatch cover on a hinge

    • Tubular filling indicator with sight glass

    • Discharge nozzle with 1 ½” valve – at the lowest point of the tank

    • Sight glass 4” on the rear bottom plate

    • Upper hatch ø350mm

    • Safety valve 4”

    • 8” nozzle on top of the tank, sealed – prepared for mounting a rubber filling funnel

    Vehicle construction: frame-type

    • Frame-type – tank mounted on a frame made of closed-section steel profiles

    • Replaceable hitch – bolted ø50mm

    • Mechanically adjustable support leg

    • Wheelset: two leaf-sprung axles

    • Tires according to table

    • Mudguards

    • Pneumatic dual-circuit braking system with 4-stage braking force regulation

    • Hand parking brake

    • Compressor – type according to table

    • Drive 540 rpm or 1000 rpm – optional

    • Reinforced temperature-resistant hoses connecting fittings

    • Overflow protection via double-ball valve with sight glass on top of the tank and a siphon with sight glass

    • Pressure/vacuum gauge (manovacuumeter)

    • Two safety valves: overpressure up to 0.05 MPa and underpressure down to -0.05 MPa

    • Oil separator – wet air filter, silencer reducing compressor noise

    • Suction nozzles 6” (ø150mm)

    • Main discharge nozzle in the rear hatch cover 6” – with 6” hydraulic slide valve

    • Front left and right nozzles – sealed, prepared for manual slide valve installation

    • Rear nozzle – sealed, prepared for manual slide valve installation

    • Electrical system 12V and lighting

    • Hose 6” (ø150)

    • Transport handles for suction hose

    • Suction hose with intake basket – protects from large debris suction

    • Suction hose length – 6 meters

    Spreading device

    • Profiled spreading shovel POMOT 94 pattern, spreading width up to 14m

    Homologation certificate

    • Enables registration and driving on public roads

    Power take-off shaft (PTO)

    VERSION SUSPENSION TIRE DIMENSIONS TIRES COMPRESSOR TYPE
    ECONOMIC 2 leaf-sprung axles (rear steering axle) 1235×500 550/60×22.5 MEC or KD 8000
    STANDARD 2 leaf-sprung axles (rear steering axle) 1230×600 600/55×22.5 MEC 9000 or KD 10000
    CLASIC 2 leaf-sprung axles (rear steering axle) 1340×600 600/55×26.5 MEC 11000 or KD 10000
    PREMIUM 2 leaf-sprung axles (rear steering axle) 1340×700 700/50×26.5 MEC 13500 or KD 12000

Optional Equipment

Spreading Devices

  • Wide-angle spreader (working width up to 14 m)

  • Slurry thrower (working width from 6 to 15 m)

  • Mobile device for road spraying and crop irrigation – 2.5 m wide

  • Mobile device for road spraying and crop irrigation – 4.5 m wide

  • PERROT type spreading shovel (working width up to 12 m)

  • Double spreading shovel (working width up to 16 m)

  • Surface injector made with dragged hose system, 3 m working width by POMOT – mechanically foldable

  • Surface injector made with dragged hose system, 3 m working width by POMOT – hydraulically foldable

  • Plant watering device

Chassis

  • Upper transport hitch (frame construction only)

  • Drawbar suspended with longitudinal spring

  • Ball hitch K80

  • Rear steering axle (only for T 546 type)

  • Hydraulic support leg

  • Hydraulic brake (on one axle)

  • 2 wheel chocks

Filling Systems

  • Additional manual slide valve 6″

  • Quick coupling for manual slide valve 6″

  • Suction hose extension 6″ – 3 m length

  • Suction hose extension 6″ – 6 m length

  • Additional suction hose 6″ – 6 m length

  • Injector 4″ or 6″ – suction from 10 m depth

  • Hydraulic compressor drive

Accessories

  • 2 metal galvanized hose boxes

  • 2 metal galvanized boxes for transporting plant protection products

  • Scale stickers for tubular indicator

  • Fully openable rear bottom plate

  • Upper hatch Ø500 with ladder

  • Ladder

  • Nozzle W52 with 2″ ball valve

  • Pneumatic agitator

  • Hydraulic screw agitator

  • Wide-angle power take-off shaft

  • Plastic tool box

  • Hand washing dispenser

  • Additional painting of galvanized tank (one side)

  • Additional painting of galvanized frame

NOTE: Other additional equipment options are also available (see the accessories tab for slurry tankers).

Downloads

Videos

Gallery

Related products

  • Slurry Tanker

    Slurry Tanker T546/A – 10000 Liters

    T 546/A Series with spring suspension are tankers designed for heavy-duty work. This series is appreciated not only domestically, but also abroad. Properly selected additional equipment for slurry application makes these tankers highly valued by our customers.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 <a ...

    Single-axle with leaf spring suspension
  • Slurry Tanker

    Slurry Tanker T544/1 – 6700 Liters

    The T 544/1 series offers the user a tanker with a capacity of 6,700 liters and a wide range of available tires. The suitable capacity combined with a very powerful compressor and 6” fittings, while requiring low tractor power, makes it an ideal alternative for tractor owners with power starting from 80 HP.

    📱 Marcin Górski: +48 691 897 575 …

    Single-axle suspension
  • Slurry Tanker

    Slurry Tanker T546 – 10000 Liters

    The T 546 Series is the perfect choice for customers investing in their farms.
    Its robust frame construction allows the tankers to be equipped with both shallow and deep injection applicators, making these tankers an ideal investment for the future. All our tankers are custom-built to meet each customer’s individual requirements.

    📱 Marcin Górski: +48 …

    Suspension: two spring-mounted axles
  • Slurry Tanker

    Slurry Tanker T550 – 18500 Liters

    The T550 trailer has been designed for precise slurry distribution. Its robust frame construction ensures durability, while the lightweight, corrosion-resistant plastic tank guarantees long service life.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

    Plastic tank