Slurry Tanker T516 – 16000 Liters

Suspension: two spring axles (rear steerable axle) — wheelbase 1900 mm

The T 516 series offers tanks with a capacity of 16,000 liters and a 1900 mm wheelbase. Thanks to their rich equipment, these tanks have become an indispensable element of every modern biogas plant. They enjoy a large following not only in the domestic market but also abroad.

📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

Category: Tag:

Standard Equipment

  1. Tank

    • Tank hot-dip galvanized on both sides

    • Tank passivation protecting fresh galvanization from the effects of slurry

    • Rear hatch Ø700 mm – hatch cover on hinge

    • Tubular filling indicator with sight glass

    • Drain outlet with 1½” valve – at the lowest point of the tank

    • Sight glass 4” on the rear bottom

    • Top hatch Ø350 mm

    • Safety valve 4”

    • 8” nozzle on top of the tank, plugged – prepared for mounting a rubber filling funnel

    Trailer construction: frame

    • FRAME – tank mounted on a frame made of closed-section profile

    • Replaceable hitch – bolted, Ø50 mm

    • Mechanically adjustable support leg

    • Wheelset: two spring axles

    • Tires according to the table

    • Mudguards

    • Pneumatic two-line brake system with 4-stage braking force adjustment

    • Hand parking brake

    • Compressor – type according to table

    • Drive shaft 540 rpm or 1000 rpm – on request

    • Reinforced temperature-resistant hoses connecting the fittings

    • Overflow protection using a two-ball valve with a sight glass on top of the tank and a siphon with sight glass

    • Pressure gauge

    • Two safety valves: overpressure up to 0.05 MPa and vacuum up to -0.05 MPa

    • Oil separator – wet air filter, muffler silencing compressor operation

    • Suction nozzles 6” Ø150 mm

    • Main drain nozzle in rear hatch cover 6” – with hydraulic gate valve 6”

    • Front left and right nozzles – plugged, prepared for manual gate valve installation

    • Rear nozzle – plugged, prepared for manual gate valve installation

    • 12V electrical and lighting installation

    • Hose 6” (Ø150)

    • Transport handles for suction hose

    • Hose with suction basket – protecting against sucking in large debris

    • Suction hose length – 6 m

    Spreading device

    • Profiled spreading scoop model POMOT 94, spreading width up to 14 m

    Homologation certificate

    • Enabling registration and use on public roads

    Power take-off shaft (PTO)

    VERSION SUSPENSION TIRE DIMENSIONS TIRES COMPRESSOR TYPE
    FRAME CONSTRUCTION ECONOMIC – 2 spring axles (rear steer axle) 1580×587 23.1×26 HD MEC or KD 8000
    STANDARD – 2 spring axles (rear steer axle) 1340×600 600/55×26.5 MEC 9000 or KD 10000
    CLASSIC – 2 spring axles (rear steer axle) 1590×714 28Lx26 MEC 11000 or KD 12000
    PREMIUM – 2 spring axles (rear steer axle)

Optional Equipment

Spreading Devices

  • Wide-angle spreader (working width up to 14 m)

  • Slurry thrower (working width from 6 to 15 m)

  • Portable device for road spraying and crop irrigation with water, 2.5 m wide

  • Portable device for road spraying and crop irrigation with water, 4.5 m wide

  • PERROT type spreading scoop (working width up to 12 m)

  • Double spreading scoop (working width up to 16 m)

  • Surface injector unit with trailing hose system, 3 m working width by POMOT – mechanically foldable

  • Surface injector unit with trailing hose system, 3 m working width by POMOT – hydraulically foldable

  • Plant watering device

Chassis

  • Upper transport hitch (only for frame construction)

  • Drawbar suspended on longitudinal spring

  • Ball hitch K80

  • Rear steerable axle (only for T 546 type)

  • Hydraulic support leg

  • Hydraulic brake (on one axle)

  • 2 wheel chocks

Filling Systems

  • Additional manual 6″ gate valve

  • Quick coupling for 6″ manual gate valve

  • 6″ suction hose extension, 3 m length

  • 6″ suction hose extension, 6 m length

  • Additional 6” suction hose, 6 m length

  • Injector 4” or 6” – suction from depth of 10 m

  • Hydraulic compressor drive

Accessories

  • 2 galvanized metal hose boxes

  • 2 galvanized metal boxes for transporting plant protection products

  • Scale stickers for tubular indicator

  • Fully openable rear bottom plate

  • Upper hatch Ø500 with ladder

  • Ladder

  • W52 nozzle with 2” ball valve

  • Pneumatic agitator

  • Hydraulic screw agitator

  • Wide-angle power take-off shaft

  • Plastic toolbox

  • Hand wash dispenser

  • Additional painting of galvanized tank (one side)

  • Additional painting of galvanized frame

NOTE: Other additional equipment options are also available (see the accessories tab for sanitation trailers).

Downloads

Videos

Gallery

Related products

  • Slurry Tanker

    Slurry Tanker T525 – 25 000 Liters

    Working on large farms can be challenging for many, but not for us. With a properly selected tanker tailored to the user’s needs, the work becomes both enjoyable and efficient.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

    TRIDEM suspension (two steerable axles) or hydraulic TRIDEM suspension
  • Slurry Tanker

    Slurry Tanker T507/1 – 2500 Liters

    The T507/1 series is available exclusively in a self-supporting construction. Properly selected optional equipment ensures that the tanker performs efficiently during farm operations. The tankers come in four versions, allowing the user to customize the tires and compressor according to their needs.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | …

    Single-axle suspension
  • Slurry Tanker

    Slurry Tanker T520 – 20 000 Liters

    The T 520 series has been developed based on the experience gained through close cooperation with our customers during the configuration process and by tailoring our offer to their individual needs. Its large capacity and comprehensive equipment make it perfect for intensive work on farms, in biogas plants, or for professional service companies.

    📱 Marcin Górski: +48 691 897 …

    suspension with two sprung axles (rear axle steering)
  • Slurry Tanker

    Slurry Tanker T546 – 10000 Liters

    The T 546 Series is the perfect choice for customers investing in their farms.
    Its robust frame construction allows the tankers to be equipped with both shallow and deep injection applicators, making these tankers an ideal investment for the future. All our tankers are custom-built to meet each customer’s individual requirements.

    📱 Marcin Górski: +48 …

    Suspension: two spring-mounted axles