Slurry Tanker T520 – 20 000 Liters

Standard Equipment

1. Tank

   • tank hot-dip galvanized on both sides

   • tank passivation protects fresh galvanization against slurry corrosion

   • rear manhole ø700mm – manhole cover on a hinge

   • tubular fill level indicator with sight glass

   • drain outlet with 1½” valve at the lowest point of the tank

   • 4″ sight glass on the rear end cap

   • top manhole ø350mm

   • 4” safety valve

   • 8” nozzle on top of the tank, capped – prepared for installation of a rubber filling funnel

   Chassis design: frame-mounted

   • FRAME DESIGN – tank mounted on a closed-section steel frame

   • interchangeable drawbar – bolted ø50mm

   • manually adjustable support leg

   Wheelset

   • TRIDEM suspension (including 2 steering axles)

   • tires according to the specification table

   • mudguards

   Braking system

   • dual-line pneumatic brakes with 4-step braking force adjustment

   • mechanical parking brake

   Compressor – type according to the table

   • drive 540 rpm or 1000 rpm – upon request

   • reinforced heat-resistant hoses connecting the fittings

   • overfill protection with a double ball valve and sight glass on top of the tank plus a siphon with sight glass

   • vacuum-pressure gauge

   • two safety valves: overpressure up to 0.05 MPa and underpressure up to -0.05 MPa

   • oil separator – wet air filter, silencer reducing compressor noise

   Suction fittings

   • 6″ suction ports ø150mm

   • main drain port in the rear manhole cover 6″ – with 6″ hydraulic slide valve

   • front left and right ports – capped, prepared for manual valve installation

   • rear port – capped, prepared for manual valve installation

   Electrical installation

   • 12V electrical and lighting system

   Hoses

   • 6″ hose (ø150)

   • transport holders for suction hose

   • suction hose with a strainer to prevent large debris from being sucked in

   • suction hose length – 6m

   Spreading device

   • profiled spreading bucket POMOT 94 pattern, spreading width up to 14m

   Type approval certificate

   • allowing registration and operation on public roads

   PTO shaft included

   VERSION	SUSPENSION	TIRE DIMENSIONS	TIRES	COMPRESSOR TYPE
   ECONOMIC	TRIDEM (INCLUDING 2 STEERING AXLES)	1235×550	550/60×22.5	MEC 9000 or KD 10000
   STANDARD	TRIDEM (INCLUDING 2 STEERING AXLES)	1230×600	600/55×22.5	MEC 9000 or KD 10000
   CLASIC	TRIDEM (INCLUDING 2 STEERING AXLES)	1340×600	600/55×26.5	MEC 11000 or KD 12000
   PREMIUM	TRIDEM (INCLUDING 2 STEERING AXLES)	1340×700	700/50×26.5	MEC 13500 or KD 12000