Slurry Tanker T525 – 25 000 Liters

TRIDEM suspension (two steerable axles) or hydraulic TRIDEM suspension

Working on large farms can be challenging for many, but not for us. With a properly selected tanker tailored to the user’s needs, the work becomes both enjoyable and efficient.

📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

Category:

Standard Equipment

  1. Tank

    • Double-sided hot-dip galvanized tank

    • Tank passivation protecting fresh galvanization against slurry corrosion

    • Rear hatch ø700 mm with hinged cover

    • Tubular filling indicator with sight glass

    • Drain outlet with 1½” valve located at the lowest point of the tank

    • 4” sight glass on the rear bottom plate

    • Top hatch ø350 mm

    • 4” safety valve

    • 8” capped outlet on top of the tank, prepared for installation of a rubber filling funnel

    Vehicle Construction: Frame

    • Frame construction – tank mounted on a frame made of closed section profiles

    • Replaceable hitch – bolted, ø50 mm

    • Mechanically adjustable support leg

    • Wheelset: Tridem or Hydraulic Tridem suspension

    • Tires according to the specification table

    • Mudguards

    • Pneumatic dual-line brake system with 4-step braking force adjustment

    • Manual parking brake

    • Compressor – type according to specification table

    • Drive: 540 rpm or 1000 rpm (optional)

    • Reinforced temperature-resistant hoses connecting the fittings

    • Overfill protection with a double-ball valve and sight glass on top of the tank and a siphon with sight glass

    • Pressure gauge and vacuum gauge

    • Two safety valves: overpressure up to 0.05 MPa and vacuum down to -0.05 MPa

    • Oil separator – wet air filter, compressor noise silencer

    Suction Outlets

    • 6” suction outlets with ø150 mm diameter

    • Main drain outlet on the rear hatch cover 6” with hydraulic slide valve 6”

    • Front left and right outlets capped, prepared for manual slide valve installation

    • Rear outlet capped, prepared for manual slide valve installation

    Electrical Installation

    • 12V electrical and lighting system

    Hose and Accessories

    • 6” hose (ø150 mm)

    • Transport handles for suction hose

    • Suction hose with strainer basket to prevent intake of large debris

    • Suction hose length – 6 m

    Spreading Device

    • Profiled spreading shovel model POMOT 94, spreading width up to 14 m

    Power Take-Off Shaft

    Version Suspension Tire Dimensions (mm) Tire Size Compressor Type
    ECONOMIC TRIDEM (incl. 2 steerable axles) 1235 x 550 550/60×22.5 MEC 9000 or KD 10000
    STANDARD TRIDEM (incl. 2 steerable axles) 1230 x 600 600/55×22.5 MEC 11000 or KD 12000
    CLASSIC TRIDEM (incl. 2 steerable axles) 1340 x 600 600/55×26.5 MEC 11000 or KD 12000
    PREMIUM TRIDEM (incl. 2 steerable axles) 1340 x 700 700/50×26.5 MEC 13500 or KD 12000
    ECONOMIC HYDRAULIC TRIDEM 1235 x 550 550/60×22.5 MEC 9000 or KD 10000
    STANDARD HYDRAULIC TRIDEM 1230 x 600 600/55×22.5 MEC 11000 or KD 12000
    CLASSIC HYDRAULIC TRIDEM 1340 x 600 600/55×26.5 MEC 11000 or KD 12000
    PREMIUM HYDRAULIC TRIDEM 1340 x 700 700/50×26.5 MEC 13500 or KD 12000

Optional Equipment

Spreading Devices

  • Wide-angle spreader (working width up to 14 m)

  • Slurry thrower (working width from 6 to 15 m)

  • Mobile device for road sprinkling and crop irrigation, 2.5 m wide

  • Mobile device for road sprinkling and crop irrigation, 4.5 m wide

  • PERROT type spreading shovel (working width up to 12 m)

  • Double spreading shovel (working width up to 16 m)

  • Trailing hose injector system with a 3 m working width by POMOT – mechanically foldable

  • Trailing hose injector system with a 3 m working width by POMOT – hydraulically foldable

  • Plant watering device

Running Gear

  • Upper transport hitch (only for frame construction)

  • Drawbar suspended on a longitudinal spring

  • K80 ball hitch

  • Rear steering axle (only for T 546 type)

  • Hydraulic support leg

  • Hydraulic brake (for one axle)

  • 2 wheel chocks

Filling Systems

  • Additional manual 6” slide valve

  • Quick coupling for 6” manual slide valve

  • 3 m extension for 6” suction hose

  • 6 m extension for 6” suction hose

  • Additional 6 m suction hose (6” diameter)

  • Injector 4” or 6” – suction from a depth of 10 m

  • Hydraulic compressor drive

Accessories

  • 2 galvanized metal boxes for hoses

  • 2 galvanized metal boxes for carrying crop protection products

  • Calibration stickers for tubular indicator

  • Fully openable rear bottom plate

  • Upper hatch Ø500 mm with ladder

  • Ladder

  • W52 outlet with 2” ball valve

  • Pneumatic agitator

  • Hydraulic screw agitator

  • Wide-angle power take-off shaft

  • Plastic toolbox

  • Handwashing dispenser

  • Additional painting of galvanized tank (one side)

  • Additional painting of galvanized frame

Note: Other additional equipment options are also available (see the accessories section for sewage tankers).

Downloads

 

Videos

Gallery

Related products

  • Slurry Tanker

    Slurry Tanker T550 – 18000 Liters

    The T 550 series is designed for demanding users who value reliability, economy, and versatility of use, thanks to the proper selection of additional equipment.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

    Suspension: two leaf-sprung axles (rear axle steerable) – wheelbase 1900 mm
  • Slurry Tanker

    Slurry Tanker T513 – 13 000 Liters

    The T 513 series consists of 13,000-liter vacuum tankers with a 1900 mm axle spacing. Efficient compressors ensure maximum performance and low operating costs, resulting in significant savings. The tanker equipped with a spreading applicator increases the efficiency of slurry utilization.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 …

    Two leaf-sprung axles (rear steering axle) – axle spacing 1900 mm
  • Slurry Tanker

    Slurry Tanker T546/2 -16000 Liters

    The T 546/2 series consists of 16,000-liter trailers with a two-axle leaf-sprung suspension and a steerable rear axle. These trailers offer the greatest flexibility for additional equipment, including various units, filling systems, lighting, and control options. This series is designed for demanding professionals.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 …

    Suspension: two leaf-sprung axles – wheelbase 1480 mm
  • Slurry Tanker

    Slurry Tanker T507/1 – 2500 Liters

    The T507/1 series is available exclusively in a self-supporting construction. Properly selected optional equipment ensures that the tanker performs efficiently during farm operations. The tankers come in four versions, allowing the user to customize the tires and compressor according to their needs.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | …

    Single-axle suspension