Slurry Tanker T507/1- 3300 Liters

Single-axle suspension

The T507/1 series is available exclusively in a self-supporting construction. Properly selected optional equipment ensures that the tanker performs effectively during farm operations. The tankers come in four versions, allowing users to customize the tires and compressor according to their needs.

📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

Category: Tag:

Standard Equipment

  1. Tank

    • Double-sided hot-dip galvanized tank

    • Tank passivation protecting fresh galvanizing against the effects of slurry

    • Rear manhole Ø500 mm (in T507/2), Ø700 mm (in T507/1, T507/2, T507/6) – hinged cover

    • Tubular filling level indicator with sight glass

    • Drain outlet with 1½” valve – located at the lowest point of the tank

    • 4” sight glass on the rear tank bottom plate

    Tanker construction: self-supporting

    • SELF-SUPPORTING – drawbar mounted on reinforced supports under the tank, hot-dip galvanized

    • Replaceable coupling – screwed, Ø50 mm

    • Mechanically adjustable support leg

    • Single-axle wheelset, two wheels

    • Tires according to the table

    • Mudguards

    • Pneumatic dual-circuit brake system with 4-level brake force adjustment

    • Manual parking brake

    • Compressor – type according to the table

    • PTO drive at 540 rpm or 1000 rpm – optional

    • Reinforced temperature-resistant hoses connecting the fittings

    • Overfill protection via two-ball valve with sight glass at the top of the tank and siphon with sight glass

    • Pressure/vacuum gauge

    • Two safety valves: overpressure up to 0.05 MPa and vacuum up to -0.05 MPa

    • Oil separator – wet air filter, silencer to reduce compressor noise

    • Suction nozzles 4” Ø110 mm (in T507/6 – 6” Ø150 mm)

    • Main drain nozzle in the rear manhole cover 4” – with 4” hydraulic gate valve

    • Front left and right nozzles – sealed, prepared for manual gate valve installation

    • Rear nozzle – sealed, prepared for manual gate valve installation

    • 12V electrical and lighting installation

    • 4” hose (Ø110)

    • Transport handles for suction hose

    • Suction hose with basket – protects against intake of large debris

    • Suction hose length – 6 m

    Spreading device

    • Profiled spreading spoon, POMOT 94 pattern, spreading width up to 14 m

    Homologation certificate

    • Enables registration and operation on public roads

    Power Take-Off Shaft (PTO)

    Version Suspension Tire Dimensions Tires Compressor Type
    SELF-SUPPORTING ECONOMIC single-axle 745×255 10.0/75-15.3
    STANDARD single-axle 855×290 11.5/80-15.3
    CLASIC single-axle 855×290 11.5/80-15.3
    PREMIUM single-axle 890×400 400/60-15.5

Optional Equipment

Spreading Devices

  • Wide-angle spreader (working width up to 14 m)

  • Slurry thrower (working width from 6 to 15 m)

  • Portable device for road spraying and crop irrigation, 2.5 m width

  • Portable device for road spraying and crop irrigation, 4.5 m width

  • PERROT type spreading spoon (working width up to 12 m)

  • Double spreading spoon (working width up to 16 m)

  • POMOT trailing hose injector unit with a working width of 3 m – mechanically foldable

  • POMOT trailing hose injector unit with a working width of 3 m – hydraulically foldable

  • Plant watering device

Chassis

  • Upper transport hitch (only for frame construction)

  • K80 ball hitch

  • Hydraulic support leg

  • Hydraulic brake

  • 2 wheel chocks

Filling Systems

  • Additional manual gate valve 4″

  • Additional manual gate valve 6″

  • Quick coupling for 6″ manual gate valve

  • Conversion of fittings from 4″ to 6″

  • Suction hose extension 4″ – 3 m length

  • Suction hose extension 4″ – 6 m length

  • Suction hose extension 6″ – 3 m length

  • Suction hose extension 6″ – 6 m length

  • Additional suction hose 4″ – 6 m length

  • Additional suction hose 6″ – 6 m length

  • Injector 4″ or 6″ – suction from depth of 10 m

  • Hydraulic compressor drive

Accessories

  • Two galvanized metal hose boxes

  • Calibration of tubular indicator with stickers

  • Fully openable rear tank bottom

  • Upper manhole Ø500 mm with ladder

  • W52 fitting with 2″ ball valve

  • Pneumatic agitator

  • Wide-angle power take-off shaft

  • Plastic tool box

  • Hand wash dispenser

  • Additional painting of galvanized tank (one side)

  • Additional painting of galvanized frame

NOTE: Other optional equipment is also available (see the accessories tab for sanitation tankers).

Downloads

   

Videos