Slurry Tanker T507/3 – 4000 Liters

Standard Equipment

1. Tank

   • Double-sided hot-dip galvanized tank

   • Tank passivation protecting fresh galvanization against the effects of slurry

   • Rear hatch ø500mm (in T507/2), ø700mm (in T507/1, T507/2, T507/6) – hinged hatch cover

   • Tubular filling indicator with sight glass

   • Discharge nozzle with 1 ½” valve – at the lowest point of the tank

   • Sight glass 4” on the rear bottom plate

   Chassis construction: self-supporting or frame

   • SELF-SUPPORTING – drawbar mounted on reinforced supports under the tank, hot-dip galvanized

   • FRAME – tank mounted on a frame made of closed-profile sections

   • Replaceable hitch – bolted ø50mm

   • Mechanically adjustable support foot

   • Single-axle wheelset, two wheels

   • Tires according to the table

   • Mudguards

   • Pneumatic two-line brake system with 4-step brake force adjustment

   • Parking handbrake

   • Compressor – type according to the table

   • Drive shaft 540 rpm or 1000 rpm – optional

   • Reinforced temperature-resistant hoses connecting fittings

   • Overflow protection via a double-ball valve with sight glass on the top of the tank and siphon with sight glass

   • Pressure/vacuum gauge

   • Two safety valves: overpressure up to 0.05 MPa and vacuum down to -0.05 MPa

   • Oil separator – wet air filter, silencer to reduce compressor noise

   • Suction nozzles 4” ø110mm (in T507/6 – 6” ø150mm)

   • Main discharge nozzle in the rear hatch cover 4” – with hydraulic 4” gate valve

   • Front left and right nozzles – capped, prepared for manual gate valve installation

   • Rear nozzle – capped, prepared for manual gate valve installation

   • 12V electrical and lighting installation

   • Hose 4” (ø110)

   • Transport handles for suction hose

   • Hose with suction basket – protects against large object suction

   • Suction hose length – 6m

   Spreading device

   • Profiled spreading spoon POMOT 94 pattern, spreading width up to 14m

   Homologation certificate

   • Allows registration and driving on public roads

   Power take-off shaft

   VERSION	SUSPENSION	TIRE SIZE	TIRE TYPE	COMPRESSOR TYPE
   SELF-SUPPORTING	ECONOMIC	890×400	400/60-15.5	MEC or KD 4000
   	STANDARD	890×400	400/60-15.5	MEC or KD 4000
   	CLASSIC	935×500	500/50-17	MEC or KD 4000
   	PREMIUM	935×500	500/50-17	MEC or KD 5000
   FRAME	ECONOMIC	1080×390	400 R 22.5	MEC or KD 4000
   	STANDARD	1080×390	400 R 22.5	MEC or KD 4000
   	CLASSIC	935×500	500/50-17	MEC or KD 4000
   	PREMIUM	935×500	500/50-17	MEC or KD 5000