Standard Equipment
-
Tank
-
Tank hot-dip galvanized on both sides
-
Tank passivation protecting fresh galvanization from the effects of slurry
-
Rear hatch ø500mm (in T507/2), ø700mm (in T507/1, T507/2, T507/6) – hinged hatch cover
-
Tubular filling level indicator with sight glass
-
Drain nozzle with 1 ½” valve – at the lowest point of the tank
-
Sight glass 4” on the rear bottom plate
Vehicle construction: self-supporting or frame-based
-
SELF-SUPPORTING – drawbar mounted on reinforced supports under the tank, hot-dip galvanized
-
FRAME-BASED – tank mounted on a frame made of closed-section profiles
-
Replaceable hitch – screwed ø50mm
-
Mechanically adjustable support leg
Wheel set: single axle or two spring-loaded axles
-
Tires according to the table
-
Mudguards
-
Pneumatic dual-circuit brake system with 4-level braking force adjustment
-
Parking hand brake
-
Compressor – type according to the table
-
Drive 540 rpm or 1000 rpm – optional
-
Reinforced temperature-resistant hoses connecting the fittings
-
Overflow protection via double-ball valve with sight glass on top of the tank and siphon with sight glass
-
Manovacuum gauge
-
Two safety valves: overpressure up to 0.05 MPa and vacuum up to -0.05 MPa
-
Oil separator – wet air filter, muffler reducing compressor noise
-
Suction nozzles 4” ø110mm (in T507/6 suction nozzles 6” ø150mm)
-
Main drain nozzle in the rear hatch cover 6” – with 4” hydraulic slide valve
-
Front left and right nozzles – sealed, prepared for manual slide valve installation
-
Rear nozzle – sealed, prepared for manual slide valve installation
-
12V electrical and lighting installation
-
Hose 4” (ø110 mm)
-
Transport handles for suction hose
-
Hose with suction basket – protects against suction of large objects
-
Suction hose length – 6 meters
Spreading device:
-
Profiled spreading scoop pattern POMOT 94, spreading width up to 14 m
Certificate of approval:
-
Enabling registration and movement on public roads
Power take-off shaft
VERSION SUSPENSION TIRE DIMENSIONS TIRES COMPRESSOR TYPE SELF-SUPPORTING ECONOMIC Single axle 1080×390 400 R 22.5 MEC or KD 5000 STANDARD Single axle 1080×390 400 R 22.5 MEC or KD 5000 CLASIC Single axle 935×500 500/50-17 MEC or KD 5000 PREMIUM Single axle 1180×510 500/60-22.5 MEC or KD 5000 FRAME-BASED ECONOMIC Single axle 1080×390 400 R 22.5 MEC or KD 5000 STANDARD Single axle 1080×390 400 R 22.5 MEC or KD 5000 CLASIC Single axle 935×500 500/50-17 MEC or KD 5000 PREMIUM Single axle 1180×510 500/60-22.5 MEC or KD 5000 -