Slurry Tanker T513 – 13 000 Liters

Two leaf-sprung axles (rear steering axle) – axle spacing 1900 mm

The T 513 series consists of 13,000-liter vacuum tankers with a 1900 mm axle spacing. Efficient compressors ensure maximum performance and low operating costs, resulting in significant savings. The tanker equipped with a spreading applicator increases the efficiency of slurry utilization.

📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

Category: Tag:

Standard Equipment

  1. Tank

    • Tank hot-dip galvanized on both sides

    • Tank passivation protecting fresh galvanizing from the effects of slurry

    • Rear hatch ø700 mm – hatch cover on hinges

    • Tubular fill level indicator with sight glass

    • Drain nozzle with 1½” valve – located at the lowest point of the tank

    • Sight glass ø4” on the rear bottom plate

    • Top hatch ø350 mm

    • Safety valve 4”

    • Nozzle ø8” on the top of the tank, sealed – prepared for mounting a rubber filling funnel

    Chassis construction: frame type

    • FRAME – tank mounted on a frame made of closed profile sections

    • Replaceable hitch – bolted ø50 mm

    • Mechanically adjustable support leg

    • Wheelset with two leaf-sprung axles

    • Tires according to the table

    • Mudguards

    • Pneumatic two-line braking system with 4-stage brake force adjustment

    • Manual parking brake

    • Compressor – type according to the table

    • Power take-off speed 540 rpm or 1000 rpm – optional

    • Reinforced temperature-resistant hoses connecting the fittings

    • Overflow protection with a double-ball valve with a sight glass on top of the tank and a siphon with sight glass

    • Manovacuum gauge

    • Two safety valves: overpressure up to 0.05 MPa and underpressure up to -0.05 MPa

    • Oil separator – wet air filter, muffler silencing compressor operation

    • Suction nozzles 6” ø150 mm

    • Main drain nozzle in rear hatch cover 6” – with hydraulic gate valve 6”

    • Front left and right nozzles – sealed, prepared for manual gate valve installation

    • Rear nozzle – sealed, prepared for manual gate valve installation

    • 12V electrical and lighting system

    • Hose 6” (ø150)

    • Transport handles for suction hose

    • Suction hose with intake basket – protects against sucking in large debris

    • Suction hose length – 6 meters

    Spreading device

    • Profiled spreading shovel model POMOT 94, spreading width up to 14 m

    Homologation certificate

    • Allowing registration and use on public roads

    Power take-off shaft

    VERSION SUSPENSION TIRE SIZE (mm) TIRE COMPRESSOR TYPE
    FRAME ECONOMIC 2 leaf-sprung axles (rear steerable axle) 1580 x 587 23.1 x 26 HD MEC or KD 8000
    FRAME STANDARD 2 leaf-sprung axles (rear steerable axle) 1340 x 600 600/55 x 26.5 MEC 9000 or KD 10000
    FRAME CLASSIC 2 leaf-sprung axles (rear steerable axle) 1590 x 714 28L x 26 MEC 11000 or KD 12000
    FRAME PREMIUM 2 leaf-sprung axles (rear steerable axle) 1340 x 700 700/50 x 26.5 MEC 13500 or KD 12000

Optional Equipment

Spreading Devices

  • Wide-angle spreader (working width up to 14 m)

  • Slurry thrower (working width from 6 to 15 m)

  • Mobile device for road sprinkling and crop irrigation, 2.5 m wide

  • Mobile device for road sprinkling and crop irrigation, 4.5 m wide

  • PERROT type spreading shovel (working width up to 12 m)

  • Double spreading shovel (working width up to 16 m)

  • Soil injector unit with trailing hose system, working width 3 m by POMOT – mechanically folding

  • Soil injector unit with trailing hose system, working width 3 m by POMOT – hydraulically folding

  • Plant watering device

Running Gear

  • Upper transport hitch (frame construction only)

  • Drawbar suspended on longitudinal spring

  • Ball hitch K80

  • Rear steerable axle (only for T 546 type)

  • Hydraulic support leg

  • Hydraulic brake (for one axle)

  • Wheel chocks, 2 pcs

Filling Systems

  • Additional manual gate valve 6″

  • Quick coupling for manual gate valve 6″

  • Suction hose extension 6″ – 3 m length

  • Suction hose extension 6″ – 6 m length

  • Additional suction hose 6″ – 6 m length

  • Injector 4″ or 6″ – suction from depth up to 10 m

  • Hydraulic compressor drive

Accessories

  • Two galvanized metal boxes for hoses

  • Two galvanized metal boxes for transporting plant protection products

  • Scaling of tubular indicator with stickers

  • Fully openable rear bottom plate

  • Upper hatch Ø500 mm with ladder

  • Ladder

  • Nozzle W52 with 2″ ball valve

  • Pneumatic mixer

  • Hydraulic screw mixer

  • Wide-angle power take-off shaft

  • Plastic tool box

  • Hand wash dispenser

  • Additional painting of galvanized tank (one side)

  • Additional painting of galvanized frame

NOTE: Other additional equipment options are also available (see accessories tab for sanitation vehicles).

Downloads

Videos

Gallery

Related products

  • Slurry Tanker

    Slurry Tanker T530 – 30 000 Liters

    The largest tanker in our offer, designed with demanding users in mind. Despite its size, the tanker is efficient and ensures user safety while maintaining low operating costs.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

    TRIDEM suspension (two steering axles) or hydraulic TRIDEM suspension
  • Slurry Tanker

    Slurry Tanker T544/1 – 6700 Liters

    The T 544/1 series offers the user a tanker with a capacity of 6,700 liters and a wide range of available tires. The suitable capacity combined with a very powerful compressor and 6” fittings, while requiring low tractor power, makes it an ideal alternative for tractor owners with power starting from 80 HP.

    📱 Marcin Górski: +48 691 897 575 …

    Single-axle suspension
  • Slurry Tanker

    Slurry Tanker T516 – 16000 Liters

    The T 516 series offers tanks with a capacity of 16,000 liters and a 1900 mm wheelbase. Thanks to their rich equipment, these tanks have become an indispensable element of every modern biogas plant. They enjoy a large following not only in the domestic market but also abroad.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 …

    Suspension: two spring axles (rear steerable axle) — wheelbase 1900 mm
  • Slurry Tanker

    Slurry Tanker T507/1- 3300 Liters

    The T507/1 series is available exclusively in a self-supporting construction. Properly selected optional equipment ensures that the tanker performs effectively during farm operations. The tankers come in four versions, allowing users to customize the tires and compressor according to their needs.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    <span ...

    Single-axle suspension