Slurry Tanker T520 – 20 000 Liters

Standard Equipment

1. Tank

   • Tank hot-dip galvanized inside and outside

   • Tank passivation protects fresh galvanization from slurry’s corrosive effects

   • Rear manhole Ø700 mm – cover on hinge

   • Tubular filling level indicator with sight glass

   • Drain outlet with 1½” valve at the tank’s lowest point

   • 4” sight glass on the rear end plate

   • Top manhole Ø350 mm

   • 4” safety valve

   • 8” stub on top of the tank, capped – prepared for mounting a rubber filling funnel

   Tanker construction: frame type

   • FRAME – tank mounted on a frame made of closed steel profiles

   • Interchangeable hitch – bolted, Ø50 mm

   • Mechanically adjustable support leg

   Running gear

   • Two sprung axles or Tridem option

   • Tires as per table

   • Fenders

   • Two-line pneumatic brake system with 4-step brake force adjustment

   • Manual parking brake

   Compressor

   • Type as per table

   • 540 rpm or 1000 rpm drive – on request

   • Reinforced, temperature-resistant hoses connecting fittings

   • Overfill protection via double ball valve with sight glass on top of the tank and siphon with sight glass

   • Vacuum-pressure gauge

   • Two safety valves: overpressure up to 0.05 MPa and vacuum up to -0.05 MPa

   • Oil separator – wet air filter and silencer for compressor noise reduction

   Suction connections

   • 6” suction stubs, Ø150 mm

   • Main 6” drain outlet in rear manhole cover with 6” hydraulic slide valve

   • Front left and right capped stubs, prepared for manual slide valve installation

   • Rear capped stub, prepared for manual slide valve installation

   Electrical system

   • 12V electrical and lighting installation

   Hose equipment

   • 6” (Ø150 mm) hose

   • Transport brackets for suction hose

   • Suction hose with strainer basket to prevent large debris intake

   • Suction hose length: 6 meters

   Spreading device

   • Shaped spreading spoon, POMOT 94 pattern, spreading width up to 14 meters

   Power take-off shaft (PTO)

   VERSION	SUSPENSION	TIRE DIMENSIONS	TIRES	COMPRESSOR TYPE
   ECONOMIC	2 sprung axles (rear axle steering)	1340×600	600/55×26.5	MEC 9000 or KD 10000
   STANDARD	2 sprung axles (rear axle steering)	1340×700	700/50×26.5	MEC 9000 or KD 10000
   CLASSIC	2 sprung axles (rear axle steering)	1650×650	650/65×30.5	MEC 11000 or KD 12000
   PREMIUM	2 sprung axles (rear axle steering)	1650×750	750/60×30.5	MEC 13500 or KD 12000