Slurry Tanker T530 – 30 000 Liters

Standard Equipment

1. Tank

   • Tank hot-dip galvanized on both sides

   • Tank passivation protecting fresh galvanization from slurry corrosion

   • Rear hatch ø700mm – hatch cover hinged

   • Tubular filling level indicator with sight glass

   • Drain outlet with 1 ½” valve – at the lowest point of the tank

   • Sight glass 4” on the rear bottom plate

   • Upper hatch ø350mm

   • Safety valve 4”

   • 8” nozzle on top of the tank, plugged – prepared for mounting a rubber filling funnel

   Trailer construction: frame type

   • FRAME TYPE – tank mounted on a frame made of closed section steel profile

   • Replaceable hitch – bolted ø50mm

   • Mechanically adjustable support leg

   • Wheelset: Tridem or hydraulic Tridem

   • Tires according to table

   • Mudguards

   • Pneumatic dual-circuit brake system with 4-stage brake force regulation

   • Parking handbrake

   • Compressor – type according to table

   • Power take-off speed 540 rpm or 1000 rpm – optional

   • Reinforced, temperature-resistant hoses connecting the fittings

   • Overfill protection via a two-ball valve with sight glass on top of the tank and a siphon with sight glass

   • Pressure gauge with manometer

   • Two safety valves: overpressure up to 0.05 MPa and underpressure up to -0.05 MPa

   • Oil separator – wet air filter, muffler silencing compressor operation

   • Suction nozzles 6” ø150mm

   • Main drain nozzle in the rear hatch cover 6” – with hydraulic gate valve 6”

   • Front left and right nozzles – plugged, prepared for manual gate valve installation

   • Rear nozzle – plugged, prepared for manual gate valve installation

   • Electrical installation 12V and lighting

   • Hose 6” (ø150)

   • Transport handles for suction hose

   • Hose with suction basket – protecting against suction of large objects

   • Suction hose length – 6m

   Spreading device

   • Profiled spreading shovel, POMOT 94 model, spreading width up to 14m

   ---

   Power Take-Off Shaft (PTO)

   Version	Suspension	Tire Dimensions	Tires	Compressor Type
   ECONOMIC	TRIDEM (including 2 steering axles)	1244×543	560/60R22.5	MEC 11000 or KD 12000
   STANDARD	TRIDEM (including 2 steering axles)	1270×700	700/50×22.5	MEC 11000 or KD 12000
   CLASSIC	TRIDEM (including 2 steering axles)	1340×600	600/55×26.5	MEC 11000 or KD 12000
   PREMIUM	TRIDEM (including 2 steering axles)	1340×700	700/50×26.5	MEC 13500 or KD 12000
   ECONOMIC	HYDRAULIC TRIDEM	1244×543	560/60R22.5	MEC 11000 or KD 12000
   STANDARD	HYDRAULIC TRIDEM	1270×700	700/50×22.5	MEC 11000 or KD 12000
   CLASSIC	HYDRAULIC TRIDEM	1340×600	600/55×26.5	MEC 11000 or KD 12000
   PREMIUM	HYDRAULIC TRIDEM	1340×700	700/50×26.5	MEC 13500 or KD 12000