Standard Equipment
-
Tank
-
Tank hot-dip galvanized on both sides
-
Tank passivation protecting fresh galvanization from slurry corrosion
-
Rear hatch Ø700 mm – hinged hatch cover
-
Tubular filling level indicator with sight glass
-
Drain nozzle with 1 ½” valve – located at the lowest point of the tank
-
4” sight glass on the rear bottom plate
-
Upper hatch Ø350 mm
Vehicle construction: self-supporting or frame type
-
SELF-SUPPORTING – drawbar mounted on reinforced supports under the tank, hot-dip galvanized
-
FRAME TYPE – tank mounted on a frame made of closed profile sections
-
Replaceable hitch – bolted, Ø50 mm
-
Mechanically adjustable support leg
-
Single-axle or two spring-suspended axles wheelset
-
Tires according to the table
-
Mudguards
-
Pneumatic dual-circuit braking system with 4-stage braking force adjustment
-
Manual parking brake
-
Compressor – type according to the table
-
Drive 540 rpm or 1000 rpm – on request
-
Reinforced, temperature-resistant hoses connecting fittings
-
Overfill protection via double ball valve with sight glass on tank top and siphon with sight glass
-
Pressure gauge (manovacuumeter)
-
Two safety valves: overpressure up to 0.05 MPa and underpressure up to -0.05 MPa
-
Oil separator – wet air filter, muffler silencing compressor operation
Suction nozzles 6” Ø150 mm
-
Main drain nozzle in the rear hatch cover 6” with hydraulic slide valve 6”
-
Front left and right side nozzles capped, prepared for manual slide valve installation
-
Rear nozzle capped, prepared for manual slide valve installation
Electrical system: 12 V and lighting
-
Suction hose 6” (Ø150 mm)
-
Transport handles for suction hose
-
Hose with suction basket – protects against large object intake
-
Suction hose length – 6 m
Spreading device
-
Profiled spreading scoop, POMOT 94 pattern, spreading width up to 14 m
Certification
-
Type approval certificate enabling registration and road use
Power Take-Off Shaft Specifications
CONSTRUCTION TYPE VERSION SUSPENSION TIRE DIMENSIONS (mm) TIRE SIZE COMPRESSOR TYPE SELF-SUPPORTING ECONOMIC Single axle 1080 x 390 400 R 22.5 MEC or KD 5000 STANDARD Single axle 1180 x 510 500/60-22.5 MEC or KD 5000 CLASIC Single axle 1235 x 550 550/60-22.5 MEC or KD 6500 PREMIUM Single axle 1170 x 600 600/50-22.5 MEC or KD 6500 FRAME TYPE ECONOMIC Single axle 1080 x 390 400 R 22.5 MEC or KD 5000 STANDARD Single axle 1180 x 510 500/60-22.5 MEC or KD 5000 CLASIC Single axle 1235 x 550 550/60-22.5 MEC or KD 6500 PREMIUM Single axle 1170 x 600 600/50-22.5 MEC or KD 6500 -