Slurry Tanker T546/1 – 13000 Liters

Suspension: Two leaf-sprung axles – axle spacing 1480 mm

Series T 546/1 are trailers with a capacity of 13,000 liters featuring a two-axle leaf-spring suspension. Their extensive additional equipment ensures these trailers meet the expectations of the most demanding users. Trailers from this series are designed for heavy-duty and efficient work.

📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

Category: Tag:

Standard Equipment

  1. Tank

    • Tank hot-dip galvanized on both sides

    • Tank passivation protecting fresh galvanizing against the effects of manure

    • Rear hatch ø700mm – hatch cover on a hinge

    • Tubular fill level indicator with a sight glass

    • Drain outlet with 1 ½” valve – located at the lowest point of the tank

    • Sight glass ø4” on the rear bottom plate

    • Top hatch ø350mm

    • Safety valve 4”

    • 8” stub on top of the tank, sealed – prepared for mounting a rubber filling funnel

    Trailer construction: Frame type

    • FRAME – tank mounted on a frame made of closed-section steel profiles

    • Replaceable hitch – bolted ø50mm

    • Mechanically adjustable support leg

    • Running gear: two leaf-sprung axles

    • Tires according to the table

    • Mudguards

    • Pneumatic dual-circuit brake system with 4-level brake force adjustment

    • Parking hand brake

    • Compressor – type according to the table

    • PTO drive 540 rpm or 1000 rpm – optional

    • Reinforced temperature-resistant hoses connecting the fittings

    • Overfill protection with a double-ball valve and sight glass on top of the tank, plus a siphon with a sight glass

    • Pressure gauge

    • Two safety valves: overpressure up to 0.05 MPa and underpressure down to -0.05 MPa

    • Oil separator – wet air filter, silencer reducing compressor noise

    • Suction stubs 6” ø150mm

    • Main drain stub in rear hatch cover 6” – with 6” hydraulic gate valve

    • Front left and right stubs sealed, prepared for manual gate valve installation

    • Rear stub sealed, prepared for manual gate valve installation

    • 12V electrical and lighting installation

    • Hose 6” (ø150)

    • Transport brackets for suction hose

    • Hose with suction basket – protecting against intake of large objects

    • Suction hose length – 6 m

    Spreading device:

    • Profiled spreading scoop model POMOT 94, spreading width up to 14 m

    Homologation certificate:

    • Allowing registration and use on public roads

    Power Take-Off Shaft

    VERSION SUSPENSION TIRE DIMENSIONS TIRES COMPRESSOR TYPE
    FRAME ECONOMIC 2 leaf-sprung axles 1180 x 510 500/60×22.5 MEC or KD 8000
    FRAME STANDARD 2 leaf-sprung axles 1235 x 500 550/60×22.5 MEC 9000 or KD 10000
    FRAME CLASSIC 2 leaf-sprung axles 1230 x 600 600/55×22.5 MEC 9000 or KD 10000
    FRAME PREMIUM 2 leaf-sprung axles 1340 x 600 600/55×26.5 MEC 13500 or KD 12000

Optional Equipment

Spreading Devices

  • Wide-angle spreader (working width up to 14 m)

  • Slurry thrower (working width from 6 to 15 m)

  • Portable device for road sprinkling and crop irrigation, 2.5 m width

  • Portable device for road sprinkling and crop irrigation, 4.5 m width

  • PERROT type spreading scoop (working width up to 12 m)

  • Double spreading scoop (working width up to 16 m)

  • POMOT trailing hose injection system slurry injector, 3 m working width – mechanically foldable

  • POMOT trailing hose injection system slurry injector, 3 m working width – hydraulically foldable

  • Plant watering device

Running Gear

  • Upper transport hitch (frame construction only)

  • Drawbar suspended on longitudinal spring

  • Ball hitch K80

  • Rear steering axle (only for T 546 model)

  • Hydraulic support leg

  • Hydraulic brake (on one axle)

  • 2 wheel chocks

Filling Systems

  • Additional manual gate valve 6″

  • Quick coupling for manual gate valve 6″

  • 3 m suction hose extension 6″

  • 6 m suction hose extension 6″

  • Additional 6 m suction hose 6″

  • Injector 4″ or 6″ – suction from 10 m depth

  • Hydraulic compressor drive

Accessories

  • 2 galvanized metal hose boxes

  • 2 galvanized metal boxes for transporting plant protection products

  • Scale stickers for tubular indicator

  • Fully openable rear bottom plate

  • Upper hatch Ø500 mm with ladder

  • Ladder

  • W52 stub with 2″ ball valve

  • Pneumatic agitator

  • Hydraulic screw agitator

  • Wide-angle PTO shaft

  • Plastic toolbox

  • Hand washing dispenser

  • Additional painting of galvanized tank (one side)

  • Additional painting of galvanized frame

Note: Other additional equipment options are also available (see the accessories section for sanitation trailers).

Downloads

Videos

Gallery

Related products

  • Slurry Tanker

    Slurry Tanker T546 – 10000 Liters

    The T 546 Series is the perfect choice for customers investing in their farms.
    Its robust frame construction allows the tankers to be equipped with both shallow and deep injection applicators, making these tankers an ideal investment for the future. All our tankers are custom-built to meet each customer’s individual requirements.

    📱 Marcin Górski: +48 …

    Suspension: two spring-mounted axles
  • Slurry Tanker

    Slurry Tanker T520 – 20 000 Liters

    The T 520 series has been developed based on the experience gained through close cooperation with our customers during the configuration process and by tailoring our offer to their individual needs. Its large capacity and comprehensive equipment make it perfect for intensive work on farms, in biogas plants, or for professional service companies.

    📱 Marcin Górski: +48 691 897 …

    suspension with two sprung axles (rear axle steering)
  • Slurry Tanker

    Slurry Tanker T507/1 – 2500 Liters

    The T507/1 series is available exclusively in a self-supporting construction. Properly selected optional equipment ensures that the tanker performs efficiently during farm operations. The tankers come in four versions, allowing the user to customize the tires and compressor according to their needs.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | …

    Single-axle suspension
  • Slurry Tanker

    Slurry Tanker T546/A – 10000 Liters

    T 546/A Series with spring suspension are tankers designed for heavy-duty work. This series is appreciated not only domestically, but also abroad. Properly selected additional equipment for slurry application makes these tankers highly valued by our customers.

    📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

    📱 Łukasz Lechicki: +48 607 999 359 | 📧 <a ...

    Single-axle with leaf spring suspension