Standard Equipment
-
Tank
-
Tank hot-dip galvanized inside and outside
-
Tank passivation protects fresh zinc coating against slurry corrosion
-
Rear manhole ø700 mm – hinged manhole cover
-
Tubular level gauge with sight glass
-
Drain outlet with 1 ½” valve at the lowest point of the tank
-
4” sight glass on the rear end plate
-
Top manhole ø350 mm
-
4” safety valve
Tanker Construction: self-supporting or frame-based
-
Self-supporting – drawbar mounted on reinforced supports under the tank, hot-dip galvanized
-
Frame-based – tank mounted on a closed-section steel frame
-
Interchangeable hitch – bolted ø50 mm
-
Mechanically adjustable support leg
Wheel Set
-
Single-axle, single-axle with suspension, or tandem (two suspended axles)
-
Tires according to the specification table
-
Fenders
Braking System
-
Dual-line pneumatic brakes with 4-stage braking force adjustment
-
Mechanical parking brake
Compressor
-
Type according to specification table
-
540 rpm or 1000 rpm drive – on request
Other Equipment
-
Heat-resistant reinforced hoses connecting the fittings
-
Overfill protection with dual-ball valve and sight glass on top of the tank, plus siphon with sight glass
-
Vacuum-pressure gauge (manovacuumeter)
-
Two safety valves: overpressure up to 0.05 MPa and vacuum up to -0.05 MPa
-
Oil separator – wet air filter, silencer for quieter compressor operation
Suction Connections
-
Suction ports 6” ø150 mm
-
Main drain outlet in rear manhole cover 6” with 6” hydraulic slide valve
-
Front left and right suction ports – capped, prepared for manual slide valve installation
-
Rear suction port – capped, prepared for manual slide valve installation
Electrical Installation
-
12V electrical and lighting system
Hoses & Accessories
-
6” (ø150 mm) hose
-
Transport brackets for suction hose
-
Suction hose with strainer basket to protect against large debris
-
Suction hose length – 6 meters
Spreading Device
-
Profiled splash plate, POMOT 94 design, spreading width up to 14 meters
Homologation Certificate
-
Allows registration and use on public roads
PTO Shaft
VERSION SUSPENSION TIRE DIMENSIONS TIRES COMPRESSOR TYPE SELF-SUPPORTING CONSTRUCTION ECONOMIC 2 suspended axles 1180×510 500/60×22.5 MEC or KD 8000 STANDARD 2 suspended axles 1180×510 500/60×22.5 MEC or KD 8000 CLASSIC 2 suspended axles 1235×550 550/60×22.5 MEC 9000 or KD 10000 PREMIUM 2 suspended axles 1235×600 600/55×22.5 MEC 9000 or KD 10000 FRAME-BASED CONSTRUCTION ECONOMIC 2 suspended axles 1180×510 500/60×22.5 MEC or KD 8000 STANDARD 2 suspended axles 1180×510 500/60×22.5 MEC or KD 8000 CLASSIC 2 suspended axles 1235×550 550/60×22.5 MEC 9000 or KD 10000 PREMIUM 2 suspended axles 1235×600 600/55×22.5 MEC 9000 or KD 10000 -