Standard Equipment
-
Tank
-
Tank hot-dip galvanized on both sides
-
Tank passivation protecting fresh galvanization from the effects of slurry
-
Rear hatch ø700mm – hatch cover on a hinge
-
Tubular filling indicator with sight glass
-
Discharge nozzle with 1 ½” valve – at the lowest point of the tank
-
Sight glass 4” on the rear bottom plate
-
Upper hatch ø350mm
-
Safety valve 4”
-
8” nozzle on top of the tank, sealed – prepared for mounting a rubber filling funnel
Vehicle construction: frame-type
-
Frame-type – tank mounted on a frame made of closed-section steel profiles
-
Replaceable hitch – bolted ø50mm
-
Mechanically adjustable support leg
-
Wheelset: two leaf-sprung axles
-
Tires according to table
-
Mudguards
-
Pneumatic dual-circuit braking system with 4-stage braking force regulation
-
Hand parking brake
-
Compressor – type according to table
-
Drive 540 rpm or 1000 rpm – optional
-
Reinforced temperature-resistant hoses connecting fittings
-
Overflow protection via double-ball valve with sight glass on top of the tank and a siphon with sight glass
-
Pressure/vacuum gauge (manovacuumeter)
-
Two safety valves: overpressure up to 0.05 MPa and underpressure down to -0.05 MPa
-
Oil separator – wet air filter, silencer reducing compressor noise
-
Suction nozzles 6” (ø150mm)
-
Main discharge nozzle in the rear hatch cover 6” – with 6” hydraulic slide valve
-
Front left and right nozzles – sealed, prepared for manual slide valve installation
-
Rear nozzle – sealed, prepared for manual slide valve installation
-
Electrical system 12V and lighting
-
Hose 6” (ø150)
-
Transport handles for suction hose
-
Suction hose with intake basket – protects from large debris suction
-
Suction hose length – 6 meters
Spreading device
-
Profiled spreading shovel POMOT 94 pattern, spreading width up to 14m
Homologation certificate
-
Enables registration and driving on public roads
Power take-off shaft (PTO)
VERSION SUSPENSION TIRE DIMENSIONS TIRES COMPRESSOR TYPE ECONOMIC 2 leaf-sprung axles (rear steering axle) 1235×500 550/60×22.5 MEC or KD 8000 STANDARD 2 leaf-sprung axles (rear steering axle) 1230×600 600/55×22.5 MEC 9000 or KD 10000 CLASIC 2 leaf-sprung axles (rear steering axle) 1340×600 600/55×26.5 MEC 11000 or KD 10000 PREMIUM 2 leaf-sprung axles (rear steering axle) 1340×700 700/50×26.5 MEC 13500 or KD 12000 -