Slurry Tanker T550 – 18000 Liters

Suspension: two leaf-sprung axles (rear axle steerable) – wheelbase 1900 mm

The T 550 series is designed for demanding users who value reliability, economy, and versatility of use, thanks to the proper selection of additional equipment.


📱 Marcin Górski: +48 691 897 575 | 📧 m.gorski@pomot.pl

📱 Łukasz Lechicki: +48 607 999 359 | 📧 l.lechicki@pomot.pl

Category: Tag:

Standard Equipment

Tank

  • Tank hot-dip galvanized on both sides

  • Tank passivation protecting fresh galvanization from the effects of slurry

  • Rear hatch ø700mm – hatch cover on hinges

  • Tubular filling level indicator with sight glass

  • Discharge nozzle with 1 ½” valve – located at the lowest point of the tank

  • 4” sight glass on the rear bottom plate

  • Top hatch ø350mm

  • Safety valve 4”

  • 8” nozzle on top of the tank, sealed – prepared for mounting a rubber filling funnel

Vehicle construction: frame type

  • FRAME TYPE – tank mounted on a frame made from closed-section profiles

  • Replaceable hitch – bolted ø50mm

  • Mechanically adjustable support leg

  • Wheelset: two leaf-sprung axles or tridem

  • Tires according to the table

  • Mudguards

  • Pneumatic dual-circuit braking system with 4-step braking force adjustment

  • Parking hand brake

  • Compressor – type according to the table

  • Drive: 540 rpm or 1000 rpm – optional

  • Reinforced temperature-resistant hoses connecting the fittings

  • Overflow protection via double-ball valve with sight glass on top of the tank and siphon with sight glass

  • Pressure gauge and vacuum gauge

  • Two safety valves: overpressure up to 0.05 MPa and vacuum up to -0.05 MPa

  • Oil separator – wet air filter, muffler to reduce compressor noise

  • Suction nozzles 6” with ø150mm diameter

  • Main discharge nozzle in the rear hatch cover 6” – with hydraulic 6” gate valve

  • Front left and right side nozzles – sealed, prepared for mounting manual gate valves

  • Rear nozzle – sealed, prepared for mounting a manual gate valve

  • Electrical installation 12V and lighting system

  • 6” hose (ø150)

  • Transport brackets for suction hose

  • Hose with suction basket – protecting against intake of large debris

  • Suction hose length – 6 meters

Spreading device

  • Profiled spreading bucket, model POMOT 94, spreading width up to 14 m

Power take-off shaft (PTO)

VERSION SUSPENSION TIRE DIMENSIONS TIRE COMPRESSOR TYPE
FRAME TYPE ECONOMIC – 2 leaf-sprung axles (rear axle steerable) 1580×587 23.1×26 HD MEC 9000 or KD 10000
STANDARD 2 leaf-sprung axles (rear axle steerable) 1340×600 600/55×26.5 MEC 9000 or KD 10000
CLASSIC 2 leaf-sprung axles (rear axle steerable) 1590×714 28Lx26 MEC 11000 or KD 10000
PREMIUM 2 leaf-sprung axles (rear axle steerable) 1340×700 700/50×26.5 MEC 13500 or KD 12000

 

Optional Equipment

Spreading Devices

  • Wide-angle spreader (working width up to 14 m)

  • Slurry thrower (working width from 6 to 15 m)

  • Portable device for road spraying and crop irrigation with 2.5 m width

  • Portable device for road spraying and crop irrigation with 4.5 m width

  • PERROT type spreading bucket (working width up to 12 m)

  • Double spreading bucket (working width up to 16 m)

  • Subsurface injector unit using trailing hose system with 3 m working width by POMOT – mechanically foldable

  • Subsurface injector unit using trailing hose system with 3 m working width by POMOT – hydraulically foldable

  • Plant watering device

Chassis

  • Upper transport hitch (only for frame construction)

  • Drawbar sprung with longitudinal spring

  • Ball hitch K80

  • Rear steerable axle (only for T 546 type)

  • Hydraulic support leg

  • Hydraulic brake (for one axle)

  • Wheel chocks, 2 pcs

Filling Systems

  • Additional manual gate valve 6″

  • Quick coupling for 6″ manual gate valve

  • Suction hose extension 6″ length 3 m

  • Suction hose extension 6″ length 6 m

  • Additional suction hose 6″ length 6 m

  • Injector 4″ or 6″ – suction from depth up to 10 m

  • Hydraulic compressor drive

Accessories

  • Metal galvanized hose boxes, 2 pcs

  • Metal galvanized boxes for transporting plant protection products, 2 pcs

  • Calibration of tubular indicator with stickers

  • Fully opening rear bottom plate

  • Upper hatch Ø500 with ladder

  • Ladder

  • W52 nozzle with 2″ ball valve

  • Pneumatic agitator

  • Hydraulic screw agitator

  • Wide-angle power take-off shaft

  • Plastic toolbox

  • Hand wash dispenser

  • Additional painting of galvanized tank (one side)

  • Additional painting of galvanized frame

NOTE: Other additional equipment options are also available (see accessories tab for vacuum tankers).

Downloads

Videos